| 2:28 AM |
test hart carts |
The utility vehicle is of automatic transmission with shaft drive. It has 3 levers to control – forward, neutral and reverse. The technology used to manufacture this UTV is from the car industry. It has maximum speed up to 33mph, 22 horse power, turning radius of 145 inches, CDI ignition, keyed electric start and a 12 volt battery. Both front and rear suspensions are of dual hydraulic shocks. This allows driver to adjust dampening to match the specific driving conditions. Both front and rear brakes are of foot controlled drum brakes. Both front and rear tires have the dimension of 25” x 8” x 15”. The UTV uses regular unleaded gasoline and has a fuel capacity of 4.7 gallons. The unit comes already filled with engine oil. The chassis uses 11 gauge steel frames which differ from others that use 14, 16 or even 18 gauge steel frames. This makes Hart Cart 300cc UTV 4×2 Utility Vehicle’s chassis thicker than others. The floorboard and kickboard are made of steel diamond plate which is skid proof as well as wear resistant. The chassis has ground clearance of 7.2”. The chassis has dimension of 103.5” x 49” x 75”. Each bucket seat is 16.7” wide. The measurement from ground to top of the seat is 32.5”. So, there is plenty of headroom for either a 5’8” or a 6’8” person. Sitting inside this vehicle, you can easily reach the gas and brake pedals. This vehicle has wheel base of 71”. The front wheel span is 41.6” while the rear wheel span is 42.1”. The whole UTV weighs around 1190 pounds. The weight in packaging meanwhile, is 1320 pounds. This utility vehicle has rear automatic lift bed, which is controlled by switch on dashboard. The utility vehicle has a digital dashboard where one can find speedometer, tachometer, odometer, engine temperature indicator as well as fuel gauge. It has an engine kill switch as well as a dump control switch. The UTV uses a glass windshield that protects riders from flying insects and rain. Most of the brand names use plastic windshield that fades to a yellowish color with time. Other budget UTVs have no windshield. It has a 2000 pound power wench. It takes only 2 to 3 hours to assemble the UTV. It comes with a very detailed step by step assembly instructions consisting of pictures. These vehicles are similar to other gasoline engines and can easily be repaired by local car repairs.